What is a Fiber Optic Pulling Eye?

Fiber optic cable pulling eye is also known as draw the eye. This is a device that is attached by a fiber optic cable. The hook can then consider the fiber cable through an innerduct fiber, channel, or be connected to sponsor a small space.

Alternatively, you can attach the towline to strengthen social ties in a fiber cable. Simply moving very basic, with little resistance. But in the race for the leadership, it is a dangerous practice, since the node can begin the pathand fiber can be breached.

Connect the power approach eye is a common practice and recommended for most of the fibers to perform the processes. Here are the general steps that use this method.

1. Insulated cables about 15 inches of cable strength members only expose
2. Cover the strength of members with epoxy glue
3. Fill the glass by a train in the face with epoxy glue and put it on the member strength. Take the epoxy resin, before drawing
4. Cover the end of the fiberCable with tape to facilitate the transition between the reinforcing materials and cables. This protects the fiber optic cable and can also resist the ingress of dirt or water
5. For long cables, use of intermediate drawing, in which the cable pulled through and finished in a figure "8" pattern on the floor and then placed on the next line section
6. Staging, re-wire the tractor pulling lubricants, cable before pulling the next line section

Another popularAttaching a rope to pull a fiber optic cable is the "Chinese Basket" or "Kellems Grip. This is particularly useful for larger diameter cables.

Related posts:

  1. What is the fiber optic connector FC?
  2. Buy Network cables for your servers
  3. Apple Or Spy-ware
  4. A beginners guide to creating a wireless network
  5. When you use the new portable hard drive

Posted: March 8th, 2010 under Hp Document Scanner Articles.